Tag: M.W:0-100

4254-15-3 A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(1) Feeding800 kg of S-propylene glycol, 1600 kg of dimethyl carbonate and 8 kg of sodium methoxide solution were added to the reaction vessel, and heating and stirring were started.The sodium methoxide solution is a 30percent sodium methoxide/methanol solution;The S-propanediol has a propylene glycol content of 99.5percent, a moisture content of 0.5percent, and a specific rotation of ?16.80-17. (2) Temperature rise reactionFirst stage heating reaction The temperature is raised to 60-65 ¡ã C, at which time a solution (mainly methanol, a small portion of dimethyl carbonate) is distilled off, received in the receiving tank, and the solution is evaporated; Second stage heating reactionThereafter, after about 12 hours, the temperature is raised from 65 ¡ã C to 90 ¡ã C, the solution is kept distilled, and the product is distilled as a by-product alcohol-based fuel (methanol and dimethyl carbonate); Third stage temperature rise reactionHeating was continued, and the temperature was raised from 90 ¡ã C to 115 ¡ã C for 8 hours, and the heating was stopped. (3) Cooling downThe temperature was lowered from 115 ¡ã C to 60 ¡ã C. The temperature in the reaction vessel is ?90 ¡ã C, and the alcohol-based fuel (mixed solution of methanol and dimethyl carbonate) is distilled off; most of the steam distilled out at >90 ¡ã C is dimethyl carbonate, and a small amount of methanol is used as a reaction raw material for recovery. (4) Decompression reaction under reduced pressureStart decompression under reduced pressure, using vacuum distillation, vacuum degree ? -0.08mpa, the temperature rises at a rate of 0.2 ¡ã C per minute,Continue to distill the solution (a mixture of methanol and dimethyl carbonate),Keep the solution evaporated, when the temperature rises to 120 ¡ã C, basically no solvent comes out at this time,The pressure reduction and desolvation can be stopped, and the temperature is lowered; the remaining liquid in the reaction tank is (S)-propylene carbonate. In the crude (S)-propylene carbonate, the (S)-propylene carbonate content is 97percent or more. From the start of the preparation to the preparation of the crude product, the reaction time was 25 hours. (5) Distillation reactionTransfer the remaining liquid after decompression and decompression to the rectification bottle, and turn on the heating and stirring.Vacuuming, ensuring a vacuum degree ? 0.1Mpa, starting the steaming before the fraction, steaming out about 100kg of the former fraction, and then transferring the finished product.The materials in the rectification tank were all distilled off, the rectification was stopped, and (S)-propylene carbonate was collected. The (S)-propylene carbonate has the following quality indicators:1. Appearance: colorless clear liquid;2, SPC chemical purity content (percent): ? 99.8;3, SPC optical purity content (percent): ? 99.4;4. SPC isomer content (percent): ? 0.6;5. Moisture (percent): ? 0.1; The yield of the finished SPC is 97percent; the specific rotation is -2 to -3;

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Propane-1,2-diol,4254-15-3,its application will become more common.

Reference£º
Patent; Weifang Huitao Chemical Co., Ltd.; Liu Jianwei; Zhang Quansheng; Wei Lanxing; Hua Xian; (6 pag.)CN109369401; (2019); A;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Example 4 Synthesis of Maytansinoid 4k,l (d) S-1,3-Di-O-p-toluenesulfonyl-butane 22: A solution of S-(-)-1,3-butanediol (21, 2.00 g (22.22 mmol) in a mixture of dry pyridine (40 mL) and dry toluene (60 mL) was treated with p-toluenesulfonyl chloride (12.70 g, 66.84 mmol) under argon at 0 C. After stirring at 0 C. for 5 min. followed by stirring at room temperature for 2 h, the mixture was evaporated under vacuum. The residue was redissolved in ethyl acetate, washed with 0.1 M aqueous NaHCO3, and saturated NaCl. The organic layer was separated, dried over MgSO4, filtered and evaporated. The residue was purified by chromatography over silica gel, eluding with 1:2 ethyl acetate/hexane to give 6.25 g (71%) of the title product 22 Rf=0.40 (1:1 EtOAc/hexane); 1H NMR (CDCl3) 7.76 (dd, 4H, J=1.0, 8.0 Hz), 7.35 (dt, 4H, J=0.4, 8.0+8.0 Hz), 4.70 (m, 1H), 4.03 (m, 1H), 3.94 (m, 1H), 2.46 (s, 6H), 1.92 (m, 2H), 1.26 (d, 3H, J=6.3 Hz); 13C NMR 145.17, 133.00, 130.11, 128.12, 127.91, 76.28, 66.21, 36.08, 21.86, 21.06; MS: 420.99 (M+Na)+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Butane-1,3-diol,24621-61-2,its application will become more common.

Reference£º
Patent; IMMUNOGEN, INC.; US2004/235840; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 19132-06-0,(2S,3S)-Butane-2,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 19132-06-0

To a 500-mL, 3-necked-RBF (equipped with a H20-cooled reflux condenser and an HCl trap) was added (2s,3s)-(+)-2,3-butanediol (Aldrich; 15.00 mL, 166 mmol) and CC14 (120 mL). SOCl2, reagentplus (14.57 mL, 200 mmol) was then added drop wise via a syringe over a period of 20 min and the resulting mixture was heated to 98C for 45 min, then allowed to cool to rt. The reaction mixture was then cooled in an ice/H20 bath, MeCN (120 mL) and H20 (150 mL) were added followed by ruthenium(III) chloride (0.035 g, 0.166 mmol). Sodium periodate (53.4 g, 250 mmol) was then added slowly portion wise over 30 min. The resulting biphasic brown mixture was stirred vigorously while allowed to reach rt for a period of 1.5 h (internal temperature never increased above rt). TLC (50% EtOAc in heptanes) showed complete conversion. The crude mixture was then poured into ice H20 and extracted twice with 300 mL of Et20. The combined organic layers were washed once with 200 mL of sat. sodium bicarbonate, washed once with 200 mL of brine, dried over Na2S04; and concentrated by rotary evaporation to give (4S,5S)-4,5-dimethyl-l,3,2- dioxathiolane 2,2-dioxide (21.2 g, 139 mmol) as a red oil.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,19132-06-0,(2S,3S)-Butane-2,3-diol,its application will become more common.

Reference£º
Patent; AMGEN INC.; BROWN, Sean P.; LI, Yunxiao; LIZARZABURU, Mike Elias; LUCAS, Brian S.; PARAS, Nick A.; TAYGERLY, Joshua; VIMOLRATANA, Marc; WANG, Xianghong; YU, Ming; ZANCANELLA, Manuel; ZHU, Liusheng; GONZALEZ BUENROSTRO, Ana; LI, Zhihong; (279 pag.)WO2016/33486; (2016); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

The flask was charged with (S) -butane-1,3-diol (1.00 g, 11.10 mmol) in dichloromethane (DCM) (27 mL),Triethylamine (1.347 g, 13.32 mmol),4-Dimethylaminopyridine (0.136 g, 1.110 mmol) and 4-methylbenzene-1-sulfonyl chloride (2.327 g, 12.21 mmol) were added. The reaction was stirred at room temperature for 1 hour.Quench the reaction with saturated NH 4 Cl,Extracted with DCM. The organic portion was dried over MgSO 4, filtered and concentrated under reduced pressure to give a residue which was purified by silica gel chromatography eluting with 0-50% ethyl acetate / heptane to give the product (0. 288 g, 1.179 mmol, yield 10.62%).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Butane-1,3-diol,24621-61-2,its application will become more common.

Reference£º
Patent; Abbvie Incorporated; Argiriadi, Maria A.; Breinlinger, Eric C.; Chien, Ellen Yulin Tsai; Cowart, Marlon D.; Frank, Kristine E.; Friedman, Michael M.; Hardy, David J.; Herold, J. Martin; Liu, Huaqing; Chu, Wei; Scanio, Marc J.; Schrimpf, Michael R.; Vargo, Thomas R.; Van Epps, Stacy A.; Webster, Matthew P.; Little, Andrew J.; Dunstan, Teresa A.; Katcher, Matthew H.; Schedler, David A.; (232 pag.)JP6557436; (2019); B1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

To a stirring solution of (S)-1, 3-butanediol (1.0 g, 0.01 MMOL) and triethylamine (1.39 g, 0.014 MMOL) in dichloromethane (10 mL) at-20C was added dropwise p- toluenesulfonyl chloride and the mixture was stirred for 2 h. The reaction mixture was then warmed to RT and stirred overnight. The reaction mixture was poured into cold H20 (20 mL), and extracted three times with DICHLOROMETHANE. The organic extracts were then washed with brine. The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo to give 2.6 g (96% yield) of title compound as an oil. MS (ESI) 244.8 (M+). The crude tosylat was used without further purification., 24621-61-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/43939; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 4254-15-3

Triethylamine was added to methylene chloride solution of (2S)-propane-1,2-diol, and then methylene chloride solution of p-toluenesulfonyl chloride was added thereto at -20C and stirred at room temperature for 18 hours to obtain (2S)-2-hydroxypropyl-4-methylbenzene sulfonate. MS(+): 231

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Propane-1,2-diol,4254-15-3,its application will become more common.

Reference£º
Patent; Astellas Pharma Inc.; EP1619185; (2006); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

General procedure: (R)-Ethyl 3-hydroxybutyrate (2.1 g, 16 mmol) and (R)-1,3 butanediol(1.0 g, 11 mmol) were combined and incubated with CAL-B (0.2 g,400 U) at 80 torr without solvent in a rotary evaporator. The reaction was monitored by withdrawing 5 muL portions of the reaction mixture,which were dissolved in 1.0 mL methanol for analysis by GC-MS. Upon consumption of the diol, the reaction mixture was taken up in dichloromethane,the beads were filtered and washed, and the solventremoved by rotary evaporation. Excess (R)-ethyl 3-hydroxybutyratewas removed by heating to 60 deg C under reduced pressure (1 torr).The residue was suspended in ethyl acetate, treated with activated carbon and filtered to yield (R)-3-hydroxybutyryl-(R)-3-hydroxybutyrateas a clear oil (1.2 g, 62%).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Article; Budin, Noah; Higgins, Erin; DiBernardo, Anthony; Raab, Cassidy; Li, Chun; Ulrich, Scott; Bioorganic Chemistry; vol. 80; (2018); p. 560 – 564;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

4254-15-3 A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 33 : (2R, 75R)-2-[(l-Aminoisoquinolin-6-yl)amino]-8-fluoro-7- {[(25)-l- hydroxypropan-2-yl]oxy } -4, 15,20-trimethyl- 13 -oxa-4, 1 1- diazatricyclo[14.2.2.16, 10]henicosa-l(18),6,8, 10(21), 16, 19-hexaene-3, 12-dione; trifluoroacetic acid [00356] To a solution of (s)-(+)-l,2-propanediol (2.0 g, 26.3 mmol) in DMF (5 mL) was added TBS-C1 (5.94 g, 39.4 mmol) and imidazole (2.147 g, 31.5 mmol). The reaction was stirred at 25 ¡ãC for 18 h. The reaction mixture was partitioned between ethyl acetate and sat. ammonium chloride. The organic phase was washed with sat. ammonium chloride and brine, dried (MgS04) and concentrated in vacuo. The crude product was purified by flash chromatography to give 33A (4.0 g, 80percent yield) as a colorless oil. 33B: (5)-Benzyl 2-((l-((tert-butyldimethylsilyl)oxy)propan-2-yl)oxy)-3-fluoro-5- nitrobenzyl(methyl)carbamate [00357] To a solution of 27B (400 mg, 1.197 mmol), 33A (251 mg, 1.316 mmol) and triphenylphosphine (345 mg, 1.316 mmol) in THF (10 mL) at 0 ¡ãC, was added DIAD (0.256 mL, 1.316 mmol) dropwise. The reaction mixture was allowed to slowly warm to rt and stirred for 16 h, then was concentrated. The crude product was purified by flash chromatography (0 to 40percent ethyl acetate/hexanes) to give 33B (577 mg, 1.139 mmol, 95percent yield) as colorless oil. MS (ESI) m/z: 507.1 [M+1]+. H MR (400 MHz, chloroform-d) delta ppm 7.78 – 7.94 (2 H, m) 7.27 – 7.43 (5 H, m) 5.17 (2 H, d, J=20.1 Hz) 4.46 – 4.74 (3 H, m) 3.65 – 3.81 (2 H, m) 2.97 (3 H, d, J=15.8 Hz) 1.31 (3 H, t, J=7.0 Hz) 0.81 (9 H, d, J=7.0 Hz) -0.05 – 0.04 (6 H, m) rotamers. 33C: (S)-4-((l-((tert-Butyldimethylsilyl)oxy)propan-2-yl)oxy)-3-fluoro-5- ((methylamino)methyl)aniline [00358] To a degassed solution of 33B (573 mg, 1.131 mmol) in MeOH (10 mL), was added 10percent Pd-C (50 mg, 0.047 mmol). The mixture was evacuated and flushed with H2 (3X), then was stirred under an atmosphere of H2 for 8 h. The mixture was filtered and concentrated to give 33C (382 mg, 1.115 mmol, 99percent yield) as a pale brown oil. MS (ESI) m/z: 343.1 [M+l]+. PI MR (400 MHz, chloroform-d) delta ppm 6.40 (1 H, d, J=1.8 Hz) 6.33 (1 H, dd, J=12.5, 2.8 Hz) 4.20 (1 H, sxt, J=5.7 Hz) 3.62 – 3.79 (4 H, m) 3.53 (2 H, br. s.) 2.40 (3 H, s) 1.25 (3 H, d, J=6.3 Hz) 0.89 (9 H, s) 0.05 (6 H, s). 33D: tert-Butyl N- {6-[({[(5-amino-2- { [(25)- l-[(tert-butyldimethylsilyl)oxy]propan-2- yl]oxy } -3 -fluorophenyl)methyl](methyl)carbamoyl} ( {4-[(2R)- 1 -hydroxypropan-2-yl]-3 – methylphenyl} )methyl)amino]isoquinolin- 1 -yl} -N-[(tert-butoxy)carbonyl]carbamate [00359] To Intermediate 5 (100 mg, 0.515 mmol), Intermediate 1 (185 mg, 0.515 mmol), and glyoxylic acid monohydrate (47.4 mg, 0.515 mmol), were added DMF (6.00 mL) and acetonitrile (6 mL). The mixture was stirred at 80 ¡ãC for 1 h, then was cooled to rt. To the mixture were added sequentially 33C (201 mg, 0.587 mmol), DMF (6.00 mL), TEA (0.215 mL, 1.546 mmol) and BOP (251 mg, 0.567 mmol). The reaction mixture was stirred at rt for 1 h, then was diluted with H20 and extracted with EtOAc (3X). The extract was washed with brine, dried ( a2S04) and concentrated. The crude product was purified by flash chromatography (1 to 15percent MeOH/methylene chloride) to give 33D (422 mg, 0.474 mmol, 92percent yield) as an orange foam. MS (ESI) m/z: 890.3 [M+l]+. H MR: complicated due to presence of diastereomers and amide rotamers. Example 33 [00360] To a solution of 33D (417 mg, 0.468 mmol) in dichloromethane (10 mL) and acetonitrile (5 mL) at 0 ¡ãC, was added phosgene (20percent in toluene, 0.243 mL, 0.492 mmol) dropwise. The mixture was stirred at 0 ¡ãC for 20 min, then was removed from the cooling bath and bubbled with Ar for 20 min. This mixture was added dropwise via a syringe pump into a solution of TEA (0.392 mL, 2.81 mmol) in dichloromethane (190 mL) over 5 h. The reaction mixture was allowed to stir at rt for 11 h, and then concentrated. The crude product was purified by flash chromatography (1 to 15percent MeOH/methylene chloride) to give a mixture of diastereoisomers. The diastereomers were separated by a prep chiral HPLC (R,R-Whelk-0 column 21.1 x 250 mm). The desired fractions were combined and concentrated. The residue was treated with TFA (4 mL) for 15 min. The reaction mixture was concentrated and purified by prep HPLC to give Example 33 (52.9 mg, 0.074 mmol, 31.4percent yield) white solid. MS (ESI) m/z: 602.2 [M+l]+. NMR (400 MHz, methanol-d4) delta ppm 8.05 (1 H, d, J=9.3 Hz) 7.64 (1 H, dd, J=7.8, 1.8 Hz) 7.44 (1 H, d, J=7.8 Hz) 7.31 (1 H, d, J=7.0 Hz) 7.18 – 7.23 (2 H, m) 6.91 (1 H, d, J=7.3 Hz) 6.83 (1 H, d, J=2.3 Hz) 6.53 (1 H, dd, J=12.4, 2.4 Hz) 5.73 (1 H, s) 5.66 (1 H, br. s.) 5.37 (1 H, d, J=17.1 Hz) 4.65 (1 H, t, J=11.0 Hz) 4.27 – 4.38 (1 H, m, J=5.7, 5.7, 5.7, 5.7, 5.4 Hz) 4.06 (1 H, d, J=17.3 Hz) 3.96 (1 H, dd, J=10.8, 4.3 Hz) 3.63 (2 H, d, J=4.8 Hz) 3.43 – 3.55 (1 H, m) 3.27 (3 H, s) 2.34 (3 H, s) 1.30 (3 H, d, J=7.0 Hz) 1.27 (3 H, d, J=6.3 Hz). Analytical HPLC (low pH, 254 nM): Sunfir…

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,4254-15-3,(S)-Propane-1,2-diol,its application will become more common.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHANG, Xiaojun; GLUNZ, Peter W.; PRIESTLEY, Eldon Scott; JOHNSON, James, A.; WURTZ, Nicholas, Ronald; LADZIATA, Vladimir; WO2013/184734; (2013); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Example 1; Preparation of (3S)-1-p-Toluenesulfonyloxy-3-triethylsilyloxy-butane (2); To a stirred solution of the (S)-(+)-1,3-butanediol 1 (1 g, 11.1 mmol), DMAP (30 mg, 0.25 mmol) and Et3N (4.6 mL, 3.33 g, 33 mmol) in anhydrous methylene chloride (20 mL) p-toluenesulfonyl chloride (2.54 g, 13.3 mmol) was added at 0 C. The reaction mixture was stirred at 4 C. for 22 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (8:2, then 1:1) to afford the tosylate (2.31 g, 85% yield) as a colorless oil.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; DeLuca, Hector F.; Clagett-Dame, Margaret; Plum, Lori A.; Chiellini, Grazia; Grzywacz, Pawel; US2008/81800; (2008); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

4254-15-3 A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: A 45percent solution of hydrogen bromide in acetic acid (33.0 g, 23.2 mL) was added dropwise over 10 min to 60.3 mmol optically active diol 4a-f with stirring and ice-cooling. The solution was stirred at 0 ¡ãC for 5 min, and next at room temperature for 45 min. Next, water (100 mL) was added, and the mixture was alkalized to pH 8 with solid Na2CO3. The solution was immediately extracted with ethyl ether (5 .x. 60 mL), and the combined extracts were dried over anhydrous Na2SO4. The ether was evaporated, and the product was distilled under reduced pressure or purified by silica gel column chromatography with gradient AcOEt-hexane 9:1.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,4254-15-3,(S)-Propane-1,2-diol,its application will become more common.

Reference£º
Article; Poterala, Marcin; Plenkiewicz, Jan; Tetrahedron Asymmetry; vol. 22; 3; (2011); p. 294 – 299;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate