Day: November 10, 2020

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.4254-15-3, name is (S)-Propane-1,2-diol. A new synthetic method of this compound is introduced below. , 4254-15-3

(1) Feeding800 kg of S-propylene glycol, 1600 kg of dimethyl carbonate and 8 kg of sodium methoxide solution were added to the reaction vessel, and heating and stirring were started.The sodium methoxide solution is a 30percent sodium methoxide/methanol solution;The S-propanediol has a propylene glycol content of 99.5percent, a moisture content of 0.5percent, and a specific rotation of ?16.80-17. (2) Temperature rise reactionFirst stage heating reaction The temperature is raised to 60-65 ¡ã C, at which time a solution (mainly methanol, a small portion of dimethyl carbonate) is distilled off, received in the receiving tank, and the solution is evaporated; Second stage heating reactionThereafter, after about 12 hours, the temperature is raised from 65 ¡ã C to 90 ¡ã C, the solution is kept distilled, and the product is distilled as a by-product alcohol-based fuel (methanol and dimethyl carbonate); Third stage temperature rise reactionHeating was continued, and the temperature was raised from 90 ¡ã C to 115 ¡ã C for 8 hours, and the heating was stopped. (3) Cooling downThe temperature was lowered from 115 ¡ã C to 60 ¡ã C. The temperature in the reaction vessel is ?90 ¡ã C, and the alcohol-based fuel (mixed solution of methanol and dimethyl carbonate) is distilled off; most of the steam distilled out at >90 ¡ã C is dimethyl carbonate, and a small amount of methanol is used as a reaction raw material for recovery. (4) Decompression reaction under reduced pressureStart decompression under reduced pressure, using vacuum distillation, vacuum degree ? -0.08mpa, the temperature rises at a rate of 0.2 ¡ã C per minute,Continue to distill the solution (a mixture of methanol and dimethyl carbonate),Keep the solution evaporated, when the temperature rises to 120 ¡ã C, basically no solvent comes out at this time,The pressure reduction and desolvation can be stopped, and the temperature is lowered; the remaining liquid in the reaction tank is (S)-propylene carbonate. In the crude (S)-propylene carbonate, the (S)-propylene carbonate content is 97percent or more. From the start of the preparation to the preparation of the crude product, the reaction time was 25 hours. (5) Distillation reactionTransfer the remaining liquid after decompression and decompression to the rectification bottle, and turn on the heating and stirring.Vacuuming, ensuring a vacuum degree ? 0.1Mpa, starting the steaming before the fraction, steaming out about 100kg of the former fraction, and then transferring the finished product.The materials in the rectification tank were all distilled off, the rectification was stopped, and (S)-propylene carbonate was collected. The (S)-propylene carbonate has the following quality indicators:1. Appearance: colorless clear liquid;2, SPC chemical purity content (percent): ? 99.8;3, SPC optical purity content (percent): ? 99.4;4. SPC isomer content (percent): ? 0.6;5. Moisture (percent): ? 0.1; The yield of the finished SPC is 97percent; the specific rotation is -2 to -3;

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Propane-1,2-diol, CAS: 4254-15-3, you can also browse my other articles.

Reference£º
Patent; Weifang Huitao Chemical Co., Ltd.; Liu Jianwei; Zhang Quansheng; Wei Lanxing; Hua Xian; (6 pag.)CN109369401; (2019); A;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below. , 538-58-9

General procedure: A flask equipped a magnetic stirring bar was charged with alpha,beta-unsaturatedketone 1 (1.0 mmol), tosylhydrazine(1.1 mmol), K2CO3 (1.5 mmol),and dioxane (2 ml). The reaction mixture was stirredunder a nitrogen atmosphere at 110 Cfor 24 h. The reaction mixture was cooled to room temperature; the reaction mixture was extracted with diethylether (5¡Á3 ml). The combined extracts was washed withbrine and dried over MgSO4, and the crude product was adsorbed ontosilica gel and purified by column chromatography (silica gel, petroleum ether:ethyl acetate 20:1) gave the pure saturated carbonyl compound 4.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Zhou, Xiaomeng; Li, Xiaokang; Zhang, Wei; Chen, Junmin; Tetrahedron Letters; vol. 55; 37; (2014); p. 5137 – 5140;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one, below Introduce a new synthetic route. , 538-58-9

General procedure: Method A: A mixture of appropriate derivatives of both 1,3-diaryl-2-propen-1-ones (1.0 equiv.) and aryl hydrazine (1.1 equiv.) was taken in a 100mL round-bottomed flask in 95% ethanol (25mL). Addition of a drop of H2SO4 initiated the precipitation. The reaction mixture was refluxed for 3 to 5h and cooled to room temperature to form precipitate in most of the cases. The residue was filtered, washed with water and dried under vacuum. In some cases where precipitate was not observed after cooling to room temperature, water was added to obtain precipitate.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Ananthnag, Guddekoppa S.; Adhikari, Adithya; Balakrishna, Maravanji S.; Catalysis Communications; vol. 43; (2014); p. 240 – 243;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.538-58-9, 1,5-Diphenylpenta-1,4-dien-3-one, introduce a new downstream synthesis route. 538-58-9

General procedure: In a general procedure, dibenzylidene acetone (1 mmol), N,N-dimethylbarbituric acid/barbituric acid/thiobarbituric acid(1 mmol) and 4 mL of ethanol:water (1:1) were taken in a 50 mL round-bottomed flask. 10 mol% of tetrabutyl ammonium bromide (TBAB) was added to the mixture, and the contents were stirred. The reaction mixture was refluxed and the progress of the reaction was monitored by TLC using ethyl acetate:petroleum ether (30:70) as eluent for disappearance of active methylene compounds. After completion of the reaction, the reaction mixture was allowed to cool to room temperature and diluted with water (5 mL). The solid obtained was filtered at pump and washed with water:ethanol (2:1). The product was recrystallized with ethanol. The products were characterized by their spectral data.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 538-58-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Aggarwal, Komal; Khurana, Jitender M.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 143; (2015); p. 288 – 297;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.24621-61-2, name is (S)-Butane-1,3-diol. A new synthetic method of this compound is introduced below. , 24621-61-2

To a solution of (S)+}1,3-butanediol (10.0 g, 0.110 mol), was added triphenylmethylchloride (33.0 g, 0.330 mol), 4-dimethylaminopyridine (1.40 g, 11.5 mmol) in CH2Cl/pyridine (1:1, 500 mL).Stirring was continued over 48 h. The solvent was removed, the mixture was diluted with ether, washed with brine and dried over Na2SO4. The organic solution was filtered and concentrated. Silica gel chromatography with (5% ethyl acetate/hexanes) produced a clear oil (24 g) in 70% yield.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Butane-1,3-diol, CAS: 24621-61-2, you can also browse my other articles.

Reference£º
Patent; Bristol-Myers Squibb Company; Merck & Co. Inc.; US6967196; (2005); B1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.24621-61-2, name is (S)-Butane-1,3-diol. A new synthetic method of this compound is introduced below. , 24621-61-2

EXAMPLE 38 2-((3S)-3-Hydroxy- 1-butyloxy)-3-(4-methylsulfonyl)phenyl-5-trifluoromethylpyridine To a solution of (S)-1,3-butanediol (807 mg) in DMF (10 mL) at 0 C. was added potassium t-butoxide (7.2 mL of a 1M solution in THF). After 1 h, the mixture was cooled to -20 C. and then 2-chloro-3-(4-methylsulfonyl)phenyl-5-trifluoromethylpyridine (1 g) was added as a solid. The resulting mixture was stirred for 24 h, warming to r.t. To the mixture was added saturated NH4Cl and the mixture was extracted with ethyl acetate. The organics were dried (MgSO4) and concentrated. Flash chromatography (1:1 hexane/ethyl acetate) provided the title compound as a white solid (323 mg). 1 H NMR (300 MHz, acetone-d6): d 1.15 (d, 3H), 1.75-2.00 (m, 2H), 3.15 (s, 3H), 3.65 (d, 1H), 3.85-4.00 (m, 1H), 4.60 (dd, 2H), 7.95 (d, 2H), 8.03 (d, 8.10 (d, 1H), 8.57 (d, 1H)., 24621-61-2

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Butane-1,3-diol, CAS: 24621-61-2, you can also browse my other articles.

Reference£º
Patent; Merck Frosst Canada & Co.; US6046217; (2000); A;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.24621-61-2, (S)-Butane-1,3-diol, introduce a new downstream synthesis route. 24621-61-2

General procedure: (R)-Ethyl 3-hydroxybutyrate (2.1 g, 16 mmol) and (R)-1,3 butanediol(1.0 g, 11 mmol) were combined and incubated with CAL-B (0.2 g,400 U) at 80 torr without solvent in a rotary evaporator. The reaction was monitored by withdrawing 5 muL portions of the reaction mixture,which were dissolved in 1.0 mL methanol for analysis by GC-MS. Upon consumption of the diol, the reaction mixture was taken up in dichloromethane,the beads were filtered and washed, and the solventremoved by rotary evaporation. Excess (R)-ethyl 3-hydroxybutyratewas removed by heating to 60 deg C under reduced pressure (1 torr).The residue was suspended in ethyl acetate, treated with activated carbon and filtered to yield (R)-3-hydroxybutyryl-(R)-3-hydroxybutyrateas a clear oil (1.2 g, 62%).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 24621-61-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Budin, Noah; Higgins, Erin; DiBernardo, Anthony; Raab, Cassidy; Li, Chun; Ulrich, Scott; Bioorganic Chemistry; vol. 80; (2018); p. 560 – 564;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below.

General procedure: A Schlenk tube with a magnetic stir bar charged with alpha,beta-unsaturated carbonyl compounds (0.5 mmol, 1 equiv), tosyl hydrazide (0.6 mmol, 1.2 equiv), NaOH (1.5 equiv), (n-Bu)4NBr (1.5 equiv). The reaction vessel was placed in an 80 C oil bath, and then stirring at this temperature for 10 h. The reaction mixture was then allowed to cool to ambient temperature, and diluted with 20 mL of ethyl acetate, and washed with brine (15 mL), water (15 mL), and then the organic layer was dried over Na2SO4. After concentrated in vacuo, the crude product was purified by column chromatography. The identity and purity of the known product was confirmed by 1H NMR, 13C NMR, and GC-MS., 538-58-9

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Wen, Jun; Fu, Yun; Zhang, Ruo-Yi; Zhang, Ji; Chen, Shan-Yong; Yu, Xiao-Qi; Tetrahedron; vol. 67; 49; (2011); p. 9618 – 9621;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.4254-15-3, name is (S)-Propane-1,2-diol, below Introduce a new synthetic route. , 4254-15-3

To separate the propylene glycol enantiomers on a chiral gas chromatography column, they were derivatized with acetic anhydride to the methyl esters. Into a small vial equipped with a Teflon lined stir bar was added 1 mL diethyl ether and equal amounts (5-10 drops) propylene glycol, pyridine, and acetic anhydride. The reaction mixture was stirred 3 hours at room temperature, washed with deionized 0 (3 x 1 mL) and dried over Na2S04. The derivatized product was then analyzed via gas chromatography. The diacetate was obtained with an ee of 97percent when (R,i?)-(Cl-salcy)CoN03 was used, and with an ee of 96percent when (5,S)-(Cl-salcy)CoN03 was used, indicating that both enantiomers produced highly regioregular poly(propylene succinate).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Propane-1,2-diol, CAS: 4254-15-3, you can also browse my other articles.

Reference£º
Patent; CORNELL UNIVERSITY; COATES, Geoffrey; WHITEHEAD, Julie; (60 pag.)WO2016/25675; (2016); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below. , 538-58-9

General procedure: In a general procedure, dibenzylidene acetone (1 mmol), N,N-dimethylbarbituric acid/barbituric acid/thiobarbituric acid(1 mmol) and 4 mL of ethanol:water (1:1) were taken in a 50 mL round-bottomed flask. 10 mol% of tetrabutyl ammonium bromide (TBAB) was added to the mixture, and the contents were stirred. The reaction mixture was refluxed and the progress of the reaction was monitored by TLC using ethyl acetate:petroleum ether (30:70) as eluent for disappearance of active methylene compounds. After completion of the reaction, the reaction mixture was allowed to cool to room temperature and diluted with water (5 mL). The solid obtained was filtered at pump and washed with water:ethanol (2:1). The product was recrystallized with ethanol. The products were characterized by their spectral data.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Aggarwal, Komal; Khurana, Jitender M.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 143; (2015); p. 288 – 297;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate