New learning discoveries about 538-58-9

The chemical industry reduces the impact on the environment during synthesis,538-58-9,1,5-Diphenylpenta-1,4-dien-3-one,I believe this compound will play a more active role in future production and life.

538-58-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,5-Diphenylpenta-1,4-dien-3-one, cas is 538-58-9,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of unsaturated ketone 1a (60.7 mg, 0.25 mmol) and phosphonium salt 2a (198.6 mg, 0.45 mmol) in CH3CN (2 mL) was stirred for 5 min. Then DBU (127 muL) in CH3CN (0.5 mL) was added. The reaction mixture was stirred at 60 C for 6 h and then air was introduced with a balloon for another 42 h. After the reaction was completed, the reaction mixture was filtered through a short silica gel column and washed with DCM. The filtrate was concentrated under reduced pressure and the residue was purified by flash chromatography (PE/EtOAc, 60/1) to afford 3a as a colorless oil (69.3 mg, 86% yield).

The chemical industry reduces the impact on the environment during synthesis,538-58-9,1,5-Diphenylpenta-1,4-dien-3-one,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Shu, Zhen-Cao; Zhu, Jian-Bo; Liao, Saihu; Sun, Xiu-Li; Tang, Yong; Tetrahedron; vol. 69; 1; (2013); p. 284 – 292;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Extracurricular laboratory: Synthetic route of 4254-15-3

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Compound M31:; To a solution of (S)-1 ,2-propandiol (5 mmol) in 5 ml_ of anhydrous CH2CI2 were added 2-methyl-1-butene (5.5 mmol) and BF3 etherate (0.5 mmol) at room temperature. The stirring was continued for another 24 h. The solvent was removed by vacuum, and the residue was purified by chromatograph on silica gel to afford intermediate (4 mmol, 80 percent yield) as oil. Then, to a suspension of this intermediate and imidazole (6 mmol) in 6 ml_ of anhydrous THF was added 4.8 mL of TBDMSCI (1 M in THF) at 0 0C. The solvent was removed by vacuum, and the residue was re-dissolved in Et2O. The heterogeneous mixture was filtered over a pad of Celite. The filtrate was washed with 1N HCI, water and brine, dried over Na2SO4 and concentrated in vacuo. The residue was chromatographed to give pure M31 (0.34 mmol, 85percent yield) as oil.

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; UNIVERSITY OF CONNECTICUT; WO2006/44381; (2006); A2;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Some tips on (S)-Propane-1,2-diol

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

(S)-Methylethylene Bis(methylsulfonate), CAS 270577-16-7, Compound A Scheme 1,was prepared from (S)-(+)-1,2-propanediol (CAS 4254-15-3, Sigma Aldrich Chemical Company) and methane sulfonyl chloride (CAS 124-63-O, Sigma Aldrich Chemical Company) according to the procedure of T. Harada, T. Mai, T. Tuyet, and A. Oku, Organic Letters (2000), 2(9), 1319-1322.

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Kent State University; Kent Displays Incorporated; US2012/273725; (2012); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Downstream synthetic route of (S)-Butane-1,3-diol

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example 7A (2S)-4-((tert-butyl(dimethyl)silyl)oxy)-2-butanol A 0 C. solution of (S)-(+)-1,3-butanediol (2.1 g, 23.3 mmol), imidazole (1.74 g, 25.6 mmol), and N,N-dimethylformamide (1.0 mL) in dichloromethane (40 mL) was treated with tert-butyl-dimethylsilyl chloride (3.68 g, 23.3 mmol). The reaction mixture was warmed to room temperature, stirred overnight, quenched with saturated aqueous ammonium chloride and extracted with dichloromethane. The combined dichloromethane layers were dried (MgSO4), filtered and concentrated to afford of the desired product of sufficient purity for subsequent use without further purification in near quantitative yield. MS (DCI/NH3) m/z 205 (M+H)+; 1H NMR (300 MHz, CDCl3) delta3.95 (m, 1H), 3.79 (m, 2H), 3.27 (br s, 1H), 1.56 (m 2H), 1.11 (d, 3H), 0.82 (s, 9H), 0.016 (s, 6H).

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Bennani, Youssef L.; Black, Lawrence A.; Dwight, Wesley J.; Faghih, Ramin; Gentles, Robert G.; Liu, Huaqing; Phelan, Kathleen M.; Vasudevan, Anil; Zhang, Henry Q.; US2001/49367; (2001); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The important role of 19132-06-0

The chemical industry reduces the impact on the environment during synthesis,19132-06-0,(2S,3S)-Butane-2,3-diol,I believe this compound will play a more active role in future production and life.

19132-06-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (2S,3S)-Butane-2,3-diol, cas is 19132-06-0,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

To a 500-mL, 3-necked-RBF (equipped with a H20-cooled refluxcondenser and an HC1 trap) was added (2s,3s)-(+)-2,3-butanediol (Aldrich; 15.00mL, 166 mmol) and CC14 (120 mL). SOC12, reagentplus (14.57 mL, 200 mmol)was then added drop wise via a syringe over a period of 20 mm and the resultingmixture was heated to 98C for 45 mm, then allowed to cool to rt. The reactionmixture was then cooled in an ice/H20 bath, MeCN (120 mL) and H20 (150 mL) were added followed by ruthenium(III) chloride (0.035 g, 0.166 mmol). Sodium periodate (53.4 g, 250 mmol) was then added slowly portion wise over 30 mm. The resulting biphasic brown mixture was stirred vigorously while allowed toreach rt for a period of 1.5 h (internal temperature never increased above rt). TLC (50% EtOAc in heptanes) showed complete conversion. The cmde mixture was then poured into ice H20 and extracted twice with 300 mL of Et20. The combined organic layers were washed once with 200 mL of sat. sodium bicarbonate, washed once with 200 mL of brine, dried over Na2504, andconcentrated by rotary evaporation to give (45,55)-4,5-dimethyl-1,3,2- dioxathiolane 2,2-dioxide (21.2 g, 139 mmol) as a red oil.

The chemical industry reduces the impact on the environment during synthesis,19132-06-0,(2S,3S)-Butane-2,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; AMGEN INC.; HARRINGTON, Paul E.; ASHTON, Kate; BROWN, Sean P.; KALLER, Matthew R.; KOHN, Todd J.; LANMAN, Brian Alan; LI, Kexue; LI, Yunxiao; LOW, Jonathan D.; MINATTI, Ana Elena; PICKRELL, Alexander J.; STEC, Markian M.; TAYGERLY, Joshua; (991 pag.)WO2018/183418; (2018); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Extracurricular laboratory: Synthetic route of 24621-61-2

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

To a stirring solution of (S)-1, 3-butanediol (1.0 g, 0.01 MMOL) and triethylamine (1.39 g, 0.014 MMOL) in dichloromethane (10 mL) at-20C was added dropwise p- toluenesulfonyl chloride and the mixture was stirred for 2 h. The reaction mixture was then warmed to RT and stirred overnight. The reaction mixture was poured into cold H20 (20 mL), and extracted three times with DICHLOROMETHANE. The organic extracts were then washed with brine. The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo to give 2.6 g (96% yield) of title compound as an oil. MS (ESI) 244.8 (M+). The crude tosylat was used without further purification.

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/43939; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Some tips on (S)-Propane-1,2-diol

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

The four (4) step reaction sequence starting from 103-1 and 103-2 (prepared as shown from S-(+)-1,2-propanediol (103-0)) provided Boc-T103a in a very good overall yield of 85%. The alternatively protected analogue Ddz-T103a was prepared using the same procedure with an overall yield of 55% [1.4 g Ddz(2RMe)opy18 was obtained starting from 1 g (5.8 mmol) of 103-1]. Synthesis of the Boc-T103b stereoisomer proceeds similarly, but starting from R-(-)-1,2-propanediol.TLC: Rf: 0.3 (100% EtOAc)

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Tranzyme Pharma Inc.; US2008/194672; (2008); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Analyzing the synthesis route of 24621-61-2

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (S)-Butane-1,3-diol, 24621-61-2

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

To a solution of commercial available (s)-3-hydroxy butanol (10 g, Aldrich) in 50 mL of DMF, TsOH (20 mg, catalytic) and MeOPhCH (OMe) 2 (24 g) were added. After 3h at 35 C on a rotovap with slight vacuum, it was cooled and quenched with aq. Sat. NaHC03. The mixture was extracted with EtOAc (3x). The organic layers were washed with brine (2x), dried and concentrated. The crude product was evaporated with toluene (3x). [0230] The crude product was dissolved in 700 mL of CH2CI2. At 0 C, DIBAL-H solution (200 mL, 1.0 M, excess) was added. The reaction was warmed to room temperature overnight. Then it was quenched with methanol (50 mL), sat. Na2S04 at 0 C. The mixture was diluted with Et20 (1. 5L). After stirred for 5h, it was filtered through a pad of celite. The filtrate was concentrated to give an oil. The oil was purified on silica gel with Hexanes/EtOAc, 10: 1,6 : 1,3 : 1, and 1: 1 to give 24 g of desired product, 343-YW-203

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (S)-Butane-1,3-diol, 24621-61-2

Reference£º
Patent; EISAI CO. LTD.; WO2003/76424; (2003); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Downstream synthetic route of 1,5-Diphenylpenta-1,4-dien-3-one

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

538-58-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,5-Diphenylpenta-1,4-dien-3-one, cas is 538-58-9,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of dialkyl phosphite (0.01 mol) in anhydrous tetrahydrofuran (30 mL),maintained under a nitrogen atmosphere, sodium (0.02 g) was added and the mixture was stirred at roomtemperature until complete dissolution of sodium. Diarylideneketone 1 (0.01 mol) was then added and themixture heated under reflux for 4 h. After cooling, the reaction mixture was diluted with water (50 mL)and extracted with CHCl3 (2 ¡Á 25 mL). The organic phase was dried over Na2SO4 and concentrated undervacuum. The obtained residue was chromatographed on a silica gel column using a mixture of Et2O andhexane 9:1 as an eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

Reference£º
Article; Lamouchi, Imen; Touil, Soufiane; Heterocycles; vol. 94; 5; (2017); p. 894 – 911;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Introduction of a new synthetic route about 1,5-Diphenylpenta-1,4-dien-3-one

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

538-58-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,5-Diphenylpenta-1,4-dien-3-one, cas is 538-58-9,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a stirred solution of indole 1a (59 mg, 0.5 mmol) and chalcone 2a (115 mg, 0.55 mmol) in MeCN (2.0mL) was added a solution of Br2 (0.00077 mL) in MeCN (0.5 mL), and the mixture was stirred for 7.0 h at 50 C. After 1a was consumed, as indicated by TLC, the reaction mixture was quenched with saturated aqueous Na2S2O3 (0.2mL) and water (10.0 mL), and extracted with CH2Cl2 three times. The residue obtained after evaporation of the solvent was purified by column chromatography on silica gel (petroleum ether-ethyl acetate = 30:1, v/v) to afford adduct 3a as a white solid (151 mg, 93% yield).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

Reference£º
Article; Liang, Deqiang; Li, Xiangguang; Zhang, Wanshun; Li, Yanni; Zhang, Mi; Cheng, Ping; Tetrahedron Letters; vol. 57; 9; (2016); p. 1027 – 1030;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate